Fcc Notes Usa - PROEMION CANlink mobile 3000 Series Device Manual

3.4. FCC Notes USA

The devices described in this device manual may only be used in mobile or stationary systems in which the distance
between antennas and persons is at least 20 cm. The antennas must further not be co-located or operated in
conjunction with any other antennas or transmitters.
NOTICE
This device has been tested and found to comply with the limits for a Class B digital device
pursuant to part 15 of the FCC rules. These limits are designed to provide adequate protection
against harmful interference in a residential installation. This device generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause interference to radio communications. There is no guarantee that interference will not

occur in a particular installation. If this device does cause interference to radio or television
reception, which can be determined by switching the device on and off, the user is advised to try
to correct the interference by one or more of the following measures:
* Realign the receiving antenna or put it in a different place.
* Increase the distance between the device and the receiver.
* Connect the device and the receiver to different supply circuits.
* Consult the dealer or an experienced radio/TV technician for help.
NOTICE
Loss of FCC certification possible.
Only use antennas with a maximum antenna gain of:
CANlink mobile 3651, 3653, 3657, 3673, 3677, 3677:
* 8dBi in WCDMA Band 2/LTE Band 2/7/25/38/41
* 5dBi in WCDMA /LTE Band 4
* 8.6dBi in GSM850
* 10.19dBi in PCS1900
* 9.42dBi in WCDMA Band 5
* 9.41dBi in LTE Band 5

* 8.7dBi in LTE Band 12
* 9.16dBi in LTE Band 13
* 9.36dBi in LTE Band 26(814-824)
* 9.41dBi in LTE Band 26(824-849)
CANlink mobile 3351, 3377:
* 3.4 dBi (850 MHz)
* 1.5 dBi (1900 MHz).
CANlink mobile 3577:
* 9.8 dBi (700 MHz, LTE FDD-12 band)
* 10.0 dBi (850 MHz, LTE FDD-5 band / UMTS FDD-5 band)
* 6.5 dBi (1700 MHz, LTE FDD-4 band)
* 8.7 dBi (1900 MHz, LTE FDD-2 band / UMTS FDD-2 band)
Changes or modifications to the device not expressly approved by the manufacturer can void the user's authority to
operate the device under FCC rules.
CANlink mobile 3000 Device Manual