Table of Contents
Advertisement
Appendix
A.5 Certificates & approvals
A.5
Certificates & approvals
Note
Granted approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Current approvals
SIMATIC NET/SIMATIC Ident products are regularly submitted to the authorities and approval
centers for approvals relating to certain markets and applications.
Contact your Siemens representative if you need a list of the current approvals for the
individual devices or check the Internet pages of Siemens Industry Online Support:
Current approvals (https://support.industry.siemens.com/cs/ww/en/ps/15728/cert)
Go to the relevant product there and select the "Certificates" entry type from the "Entry list"
tab.
Overview of the approvals and standards
The RF166C communication module has the following approvals and meets the following
standards:
• EC directives and standards
– EU directive 2014/30/EU "Electromagnetic Compatibility" (EMC directive) according to
– EU Directive 2011/65/EU "Restriction of the use of certain hazardous substances in
• cULus LISTED IND. CONT. EQ.
• FCC
EU Declaration of Conformity
154
the following standards:
EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55032, EN 55024
electrical and electronic equipment" (RoHS)
The RF166C communication module meets the general and safety-related
requirements of the following EU directives and conforms to the harmonized
European standards (EN) for programmable controllers published in the official
gazettes of the European Union and here:
Operating Instructions, 03/2022, C79000-G8976-C578-02
SIMATIC RF166C
Advertisement
Table of Contents
