Operation Via The Cb Gate User Interface; Structure Of The User Interface - Siemens SIMATIC Ident CB Gate Operating Instructions Manual

Operation via the CB Gate user interface

8.1

Structure of the user interface

Configuration, operation and reading of information from the SIMATIC Ident CB Gate takes
place via the SIMATIC HMI TP900 Comfort Panel.
NOTICE
Security recommendation: Authentication
Note that the controller, the reader and the Panel are password-protected in the factory
state. The password for the user "admin" is "CB_Gate2022!".
To ensure that no unauthorized persons can access the CB Gate settings, we recommend
that you leave authentication enabled, change existing passwords and create new user
profiles. You should also read the information under the "Passwords" heading of the
"Security recommendations (Page 7)" section.
The authentication can only be enabled/disabled by an administrator.
For additional information on creating/deleting user profiles, refer to the section ""User
management" menu item (Page 58)".
SIMATIC Ident CB Gate
Operating Instructions, 08/2022, C79000-G8976-C671-01
8
41