The Menu Command "System - Reader Firmware - Siemens SIMATIC RF185C Operating Instructions Manual

Configuring with the WBM
7.3 The menu items of the WBM
configuration data is lost, but user management settings and address information are
retained.
Device description files
The GSDML and ESD files current at the time of delivery as well as the OPC UA device
description file are stored on the communication module. Click the "Save on PC" button to
transfer device description files to the connected PC. You can use these files to integrate the
communication modules into the configuration software of your S7 and Rockwell controllers.
7.3.14

The menu command "System - Reader firmware"

In the "System - Reader Firmware" menu item, you can update the firmware of the readers
connected to the communication module.
This page is divided into the following areas:
• Basic settings
• Firmware update
Figure 7-19 The menu command "System - Reader firmware"
Basic settings
In this area, you can use the "Reader interfaces" parameter to specify the reader for which a
firmware update is to be performed. Depending on the connected reader, you can select the
desired read point.
Firmware update
In the "Firmware update" area, you can update the firmware of the selected reader. For a
detailed description of firmware updates, refer to the section "Firmware update (Page 140)".
112
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
Operating Instructions, 03/2022, C79000-G8976-C512-04