Edid Dvi Input Format Menu - Barco ScreenPRO-II User Manual

4. Menu Orientation
bafa=asf=fåéìí=cçêã~í=jÉåì
From the System Menu , press { EDID } to display the EDID DVI Input Format Menu , a
sample of which is shown below.
H
O
M
E
B
A
C
K
Figure 4-24. EDID DVI Input Format Menu (sample)
The EDID DVI Input Format Menu enables you to update the system's preferred EDID
resolution for the two DVI inputs ( BG A and BG/DSK B ).
Extended Display Identification Data (EDID) is a VESA standard data format that contains
information about a display device and its resolution capabilities, both preferred and
allowed. The ScreenPRO-II EDID file is stored in non-volatile memory. This file is read by
an external computer's DVI graphic card when the DVI output is connected to the
ScreenPRO-II's BG A or BG/DSK B input connectors during boot-up.
•
•
•
ScreenPRO-II • User's Guide
EDID DVI Input Format
Format
Current:
To change EDID for BGA, BGB,
and DSK, select desired format
and select Program EDID.
Note This menu is designed for advanced users only. Do not
program the EDID unless it is necessary.
Format — select the preferred DVI video format with which you want to program
the ScreenPRO-II's EDID non-volatile memory
Current — displays the current EDID video format that resides in memory.
Press { PROGRAM EDID } to program EDID with the new selected format. A
warning message will be shown.
Note Once EDID programming is complete on ScreenPRO-II, you
will be prompted to power down the external computer, power
it back on again, and then ensure that the computer's format
is set to match.
1280 x 1024 @ 60
[ 1280 x 1024 @ 60 ]
PROGRAM
EDID
System Menu
A
D
J
61