Barco ScreenPRO-II User Manual page 36

2. Hardware Orientation
Front Panel Sections
jáñÉê=cìåÅíáçåë=pÉÅíáçå
The figure below illustrates the Mixer Functions Section .
Split
KEY
Layer
Mixer Functions
Figure 2-7. Mixer Functions Sections
The buttons in the Mixer Functions Section enable you to change or modify the selected
(blinking) layer button in the Layer Control Section .
Split Layer — press to select whether or not the mixer's two layers work independently or
in tandem.
Split
•
Layer
•
In Chapter 6, refer to the "
Key — press to change the selected layer (in the Layer Control Section ) and its
associated source to a key effect. The Key Adjustment Menu appears on the Touch
KEY
Screen. In Chapter 4, refer to the "
Full Screen — press to take the active PIP or key to full screen. In each case, the source's
height will be used as the parameter that defines the full screen size.
Full
Screen
In Chapter 6, refer to the "
PIP — press to change the selected layer (in the Layer Control Section ) and its
associated source to a PIP effect. The PIP Adjustment Menu appears on the Touch
PIP Screen. In Chapter 4, refer to the "
Clear Layer — press Clear Layer to remove the currently selected (blinking) layer from
Preview — in preparation for transitioning it off Program.
Clear
In Chapter 6, refer to the "
Layer
instructions.
24
Clear
Full
PIP
Screen Layer
With Split Layer enabled (and the button lit), each layer works independently.
You have the freedom to size, position, manipulate and transition each one
independently of the other.
With Split Layer disabled, the two layers are ganged together, offering a variety of
additional transitions including the toggle, mix source and swap functions.
Working with Layers
Example : If a source's original dimension is 1280 x 1024, pressing Full
Screen expands (or reduces) that PIP to fill the output screen vertically. If
borders are ON , they will be taken into account so that they are visible.
Using Full Screen
Clearing Layers from Program
Swap
Freeze Reset
Z-Order
" section on page 120 for details.
Key Menu " section on page 75 for details.
" section on page 129 for instructions.
PIP Adjustment Menu " section on page 67 for details.
" section on page 128 for
ScreenPRO-II • User's Guide
Move
Move
Setup