Barco ScreenPRO-II User Manual page 66

4. Menu Orientation
System Menu
•
•
•
•
•
•
•
•
54
Mix Src / Swap — allows you to switch between Mix Source and Swap modes:
~
With Mix Source enabled, both of the mixer's PIPs are perfectly co-
located. Layer A and Layer B are exactly the same size — in exactly the
same position — with exactly the same border and shadow.
~
With Swap enabled, both of the mixer's PIPs can be located
independently, with different positions, sizes, borders and shadows.
Layer A and Layer B can be positioned and sized as desired — but only
one can be on screen at a time.
In Chapter 6, refer to the "
page 122 for details on Split and Mix modes.
Important The Mix Src / Swap function only appears on the System
Menu when the Split Layer button is off. When the Split
Layer button is on, the line is hidden.
Press { RESET } to display the Reset Menu . Refer to the "
page 58 for details.
Press { SW VER } to display the Software Version Menu . Refer to the "
Version Menu " section on page 59 for details.
Press { DIAG } to display the Diagnostics Setup Menu . Refer to the
" Diagnostics Setup Menu
Press { SERIAL 1 } to display the Serial 1 Port Setup Menu . Refer to the "
Port Setup Menu " section on page 60 for details.
Press { EDID } to display the EDID DVI Input Format Menu . Refer to the "
DVI Input Format Menu " section on page 61 for details.
Press { TECH SUPPORT } to display the Technical Support Menu . Refer to the
" Technical Support Menu
Press { SAVE } to save all settings in the system file.
Understanding Split and Mix Modes
" section on page 55 for details.
" section on page 62 for details.
ScreenPRO-II • User's Guide
" section on
Reset Menu " section on
Software
Serial 1
EDID