Barco ScreenPRO-II User Manual page 53

4. Menu Orientation
fåéìí=^Åèìáëáíáçå=jÉåì
The figure below illustrates a "pre" menu — the Input Acquisition Menu .
H
O
M
E
S
A
V
E
Figure 4-4. Input Acquisition Menu: No File Saved (sample)
The Input Acquisition Menu appears if you have selected a source, video is present and
the source is "acquired" — but the source has not been saved.
•
•
Once the source has been saved, the next time you select the source, the Input Menu will
be displayed — or the source will simply switch (if you are on another menu, such as the
PIP Adjustment Menu ).
If you select a source and there is a video mismatch, if video is not present or if the
acquisition fails, one of the following messages will appear:
File mismatch or no video
detected.
Check cable connections
for input _______ .
Ensure video source is present.
Select FORCE ACQUIRE once video
is reconnected.
Figure 4-5. Input Acquisition Menu: Mismatch or No Video (sample)
In this situation, the following actions are recommended:
•
•
•
ScreenPRO-II • User's Guide
INPUT ACQUISITION
Source acquired.
Select ADJUST to adjust source
or SAVE to save configuration.
ADJUST
Press { SAVE } to save the source and display the Input Menu , or ...
Press { ADJUST } to display the Input Menu without saving the source.
Check all cable connections for the selected input.
With a connection established, press { FORCE ACQUIRE } to perform the optimum
image setup and automatically display the Input Menu , or ...
Press { ADJUST } to display the Input Menu without performing a FORCE
ACQUIRE.
SRC_3
Source acquisition failed.
Check cable connections
for input _______ .
Ensure video source is present.
Select FORCE ACQUIRE once video
is reconnected.
Input Menu
41