Barco ScreenPRO-II User Manual page 41

3. Hardware Installation
•
•
`~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå
The table below provides information regarding cables and adapters:
Table 3-1. ScreenPRO-II System Cables and Adapters
Cable
HD-15 to 5xBNC Breakout Cable
HD-15 to HD-15
DVI to DVI
Belden 1694A (recommended)
Belden RG-59 (recommended)
HD-15 to HD-15
DVI to DVI
Ethernet Hub or Switch
RJ-45 Ethernet Cable
AC Power Cord
ScreenPRO-II • User's Guide
Rack mount each ScreenPRO-II chassis from the front rack ears using four rack
screws (not supplied). Rack threads may be metric or otherwise — depending
upon the rack type.
Install the lower of the two mounting holes first.
Input Connections
Analog input connectors (via breakout)
Analog input connections (direct)
Digital background/DSK connections (direct)
SDI/HD-SDI input connections
Analog connections (via breakout)
Output Connections
Analog Preview and Program outputs (direct)
Digital Program output (direct)
Remote Connections
For use with optional Encore or ScreenPRO-II Controller
For use with optional Encore or ScreenPRO-II Controller
Power Connections
AC Power, 7 foot, 10A
Cable and Adapter Information
Description Note
4 Cables Supplied
Customer Supplied
Customer Supplied
Customer Supplied
Customer Supplied
Customer Supplied
Customer Supplied
Customer Supplied
Customer Supplied
1 Cord Supplied
29