Barco ScreenPRO-II User Manual page 92

4. Menu Orientation
Key Menu
•
•
•
hÉó=cìåÅíáçåë
At the bottom of the Key Adjustment Menu , three radio buttons enable you to perform
various Key adjustment functions.
•
•
•
•
80
Press { KEY } to return to the Key Menu . Refer to the "
section on page 76 for details.
Press { MATTE } to display the Matte Menu . See the "
page 78 for details.
Press { CROP } to display the Crop Menu . Refer to the "
page 71 for details.
Note To return the Key to its default size and aspect ratio, press the
RESET button in the Layer Functions Section . No other
parameters will be affected.
Press { TRACK } to lock H Size and V Size together. Regardless of the Key's
current aspect ratio, its size will adjust proportionally when the SIZE knob is used
to change size.
Press { H SIZE } to adjust only the horizontal size, leaving the vertical size alone.
In this way, you can stretch the Key horizontally.
Press { V SIZE } to adjust only the vertical size, leaving the horizontal size as is. In
this way, you can stretch the Key vertically.
Press { RATE } to adjust the move rate of the Key, from keyframe to keyframe.
Key Menu Description
Matte Menu " section on
Crop Menu " section on
ScreenPRO-II • User's Guide
"