Sizing Menu - Barco ScreenPRO-II User Manual

4. Menu Orientation
Input Menu
•
•
•
•
•
•
•
If you have made changes to the selected input, use the Input Configuration Menu to
save your changes. See the "
fåéìí=mêÉ=~åÇ=pìÄ=jÉåìë
The following pre and sub menus can be accessed from the Input Menu :
•
•
•
•
•
40
Press { CFG } to display the Input Configuration Menu . Refer to the "
Configuration Menu " section on page 42 for details.
Press { AR } to display the Aspect Ratio Menu . Refer to the "
section on page 46 for details.
Press { SAVE } to save the selected input in the designated input file.
Note Every sub menu under the Input Menu includes a { SAVE }
button. This enables you to save the input at any point in the
adjustment process, regardless of your location within the
menu tree. The "save" uses the information selected on the
Input Configuration Menu .
Press { SELECT FORMAT } to "accept" a manually selected input format. In
Appendix A, refer to the " Input and Output Resolutions
details on all available resolutions.
Press { SIZING } to display the Sizing Menu . Refer to the "
on page 43 for details.
Press { COLOR BALANCE } to display the Color Balance Menu . Refer to the
" Color Balance Menu " section on page 45 for details.
Press { FORCE ACQUIRE } to force the system to perform the optimum image
setup. Use this feature as a good starting point for setup, as required.
The FORCE ACQUIRE
Note
selected input — not on all inputs simultaneously.
Input Configuration Menu
Input Acquisition Menu
Input Configuration Menu

Sizing Menu

Color Balance Menu
Aspect Ratio Menu
Input
Aspect Ratio Menu
" section on page 149 for
Sizing Menu
command only works on the
" section on page 42 for details.
ScreenPRO-II • User's Guide
"
" section