Barco ScreenPRO-II User Manual page 63

4. Menu Orientation
qÉëí=m~ííÉêå=jÉåì
From the Output Menu , press { TEST PATTERN } to display the Test Pattern Menu , a
sample of which is shown below.
H
O
M
E
B
A
C
K
Figure 4-15. Test Pattern Menu (sample)
The Test Pattern Menu enables you to display a variety of test patterns, for system and
projector alignment.
•
•
•
ScreenPRO-II • User's Guide
TEST PATTERN
Output Monitor
Type
Raster Box
Output Monitor — selects the monitor(s) that are affected by the test pattern
settings, either All , Program or Preview .
Type — sets the test pattern. Choose between:
~
Off
~
H Ramp , V Ramp
~
100% Color Bars , 75% Color Bars
~
16x16 Grid , 32x32 Grid
~
Burst
~
50% Gray , Gray Steps 1, Gray Steps 2
~
White , Black , Red , Green , Blue
Note When the test pattern is enabled, it assumes the highest
visual priority and covers all effects beneath. When disabled,
the effects once again re-appear.
Raster Box — displays a raster box defined by the exact outer edges of the
selected output resolution. For example, if the output is set to 1024 x 768, the
raster box will encapsulate that exact format. Please note:
~
The Burst test pattern is the only pattern that is smaller than the selected
output resolution. When the Raster Box is enabled, the Burst pattern
will appear within its boundaries.
~
The Raster Box can be enabled when the test pattern is Off .
Output Menu
All
N
A
Burst V
On
A
D
J
51