Barco ScreenPRO-II User Manual page 137

6. Operations
jçÇáÑóáåÖ=mfmë
Use the following steps to modify a PIP:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
ScreenPRO-II • User's Guide
Ensure that the PIP is selected in the Layer Control Section , and active for
modification on Preview.
If the PIP Adjustment Menu is not visible, press PIP in the Mixer Functions
Section .
Size and Position — Use the SIZE , H POS and V POS controls in the PIP
Adjustment Menu to size and position the PIP on Preview as desired. In
Chapter 4, refer to the " PIP Adjustment Menu Description
for menu details.
Source Size — From the PIP Adjustment Menu , press { SRC } to display the
Input Source Adjustment Menu . Use the menu to adjust the source image's
size and position within the PIP. In Chapter 4, refer to the "
Adjustment Menu Description
Crop — From the PIP Adjustment Menu , press { CROP } to display the Crop
Adjustment Menu . Use the menu to select the type of crop, the aspect ratio, and
the image's H and V size. In Chapter 4, refer to the "
page 71 for menu details.
Border — From the PIP Adjustment Menu , press { BORDER } to display the
Border Menu . Use the menu to select the border's style, color and size. In
Chapter 4, refer to the " Border Menu
Shadow — From the Border Menu , press { SHADOW } to display the Shadow
Menu . Use the menu to choose the shadow's size, position and transparency. In
Chapter 4, refer to the " Shadow Menu
Special Effects — From the Border Menu , press { EFX } to display the Image
Effects Menu . Use the menu to select monochrome or color mode, to modify
chroma and hue, to invert the color, and to set a strobe effect. In Chapter 4, refer
to the " Image Effects Menu
Global Functions — Remember that the following global functions are always
available to you:
~
Press Reset to reset the current effect (e.g., PIP, Key, crop, etc.) to a
nominal default value.
~
Press Full Screen to bring the PIP to full screen, using the source's
height as the defining factor.
~
Press Freeze to freeze the PIP (on both Program and Preview). Press
again to unfreeze.
Transition — Transition the new "look" to program with a MIX , WIPE or CUT .
Refer to the " Working with Transitions
" section on page 82 for menu details.
Crop Menu
" section on page 70 for menu details.
" section on page 72 for menu details.
" section on page 73 for menu details.
" section on page 135 for details.
Working with Layers
" section on page 68
Input Source
" section on
125