Barco ScreenPRO-II User Manual page 143

6. Operations
rëáåÖ=ildl=~ë=_ä~Åâ=mêÉîáÉï
In addition to its use as a full screen downstream graphic (with the highest visual layer
priority), the LOGO layer can also be used as a convenient "black preview" function. This
enables you to fade to black at any time, from any simple or complex setup, without
affecting the underlying "look."
LOGO
Use the following steps to fade to black using the LOGO :
1.
2.
3.
4.
ScreenPRO-II • User's Guide
Set up your PIPs and Keys in the normal manner.
In the Layer Control Section , press LOGO to display the Logo Input Setup
menu. The full screen LOGO appears on preview. Note that raster boxes for
PIPs and Keys remain visible.
On the Logo Input Setup menu, select Black as the "type."
Transition the LOGO to Program with a MIX , WIPE or CUT . A transition to black
will occur.
Note After a transition, the LOGO layer is automatically cleared
from Preview. In this way the next transition will always fade
up from black to your previous setup.
Working with Layer Functions
131