6. Operations
p~îáåÖ=píáää=cê~ãÉë=áå=mÉêã~åÉåí=jÉãçêó
Use the following steps to save a captured still into permanent memory.
1.
2.
System controls will be locked
for 2 to 3 minutes while saving.
Figure 6-8. Background Frame Save Warning
3.
ScreenPRO-II • User's Guide
Capture a still as outlined in the previous two sections.
~
"
Capturing Still Frames from a Background Input
~
"
Capturing Still Frames from a Layer
Warning
Do not execute the next step during live production. All
controls will be locked during the "save" process. It is
recommended that you save stills in pre-production as a
"setup" procedure.
On the Frame Grab Menu , press { SAVE } to save the captured frame into the
selected permanent storage register ( FG_1 , FG_2 or FG_3 ). Once pressed, the
screen will display an important warning:
Save Now?
~
Press YES to save the frame. All front panel controls will be locked for
up to three minutes.
~
Press NO to cancel the procedure.
If required, press { DELETE } to delete the selected frame from permanent storage.
This button only appears when frames are stored in permanent memory.
Capturing Still Frames
" on page 137.
" on page 138.
139