Modifying Keys - Barco ScreenPRO-II User Manual

6. Operations
3.
4.
5.
6.
7.
8.
jçÇáÑóáåÖ=hÉóë
Use the following steps to modify a Key:
1.
2.
3.
4.
5.
6.
7.
ScreenPRO-II • User's Guide
~
The layer button blinks to indicate that it is active for modification.
~
In the Source Selection Bus , the source currently assigned to the layer
blinks.
~
On the Preview monitor, the raster box for the selected layer blinks (even
if it is hidden under the DSK).
In the Mixer Functions Section , ensure that the KEY button is lit and the Key
Menu is visible. If the menu is not visible, press KEY .
Press { HOME } > { SYSTEM } to display the System Menu .
~
To co-locate the mixer's Keys, select MIX SOURCE .
~
To locate the mixer's Keys independently, select SWAP .
~
To toggle sources, enable Toggle .
On the Source Selection Bus , press the button for the desired (new) key source.
The button blinks to indicate that it is selected, and the source appears on
Preview.
Adjust the Key's mode, clip, gain, opacity, fill source, size, position, source image
and cropping as desired. Refer to the "
details.
Transition the new "look" to program with a MIX , WIPE or CUT . Refer to the
" Working with Transitions
Repeat the procedure from step 1 for the next transition.
Ensure that the Key is selected in the Layer Control Section , and active for
modification on Preview.
If the Key Menu is not visible, press KEY in the Mixer Functions Section .
Clip, Gain, Mode, Opacity
Key's clip, gain, invert mode and opacity on Preview as desired. In Chapter 4,
refer to the " Key Menu Description
Fill Source — Use the controls in the Key Menu to select a self or matte fill key.
If Matte is selected, press { MATTE } to display the Matte Menu , with which you
can choose the matte fill color. In Chapter 4, refer to the "
on page 78 for menu details.
Size and Position — From the Key Menu , press { SIZE & POS } to display the
Key Adjustment Menu . Use the controls to size and position the Key on Preview
as desired. In Chapter 4, refer to the "
page 79 for menu details.
Crop — From the Key Menu , press { CROP } to display the Crop Adjustment
Menu . Use the menu to select the type of crop, the aspect ratio, and the image's
H and V size. In Chapter 4, refer to the "
menu details.
Source Size — From the Crop Menu , press { SRC } to display the Key Source
Adjustment Menu . Use the menu to adjust the source image's size and position
within the PIP. In Chapter 4, refer to the "
Description " section on page 82 for menu details.

Modifying Keys

" section on page 135 for details.
— Use the controls in the Key Menu to adjust the
" section on page 76 for menu details.
Key Adjustment Menu
Crop Menu " section on page 71 for
Input Source Adjustment Menu
Working with Layers
" section on page 127 for
Matte Menu " section
" section on
127