Working With Transitions - Barco ScreenPRO-II User Manual

6. Operations
tçêâáåÖ=ïáíÜ=qê~åëáíáçåë
Use the following steps to perform a Cut :
1.
2.
CUT
Use the following steps to perform a Mix (or "dissolve"):
1.
2.
MIX
3.
Use the following steps to perform a Wipe :
1.
2.
WIPE
3.
ScreenPRO-II • User's Guide
Set up the desired "look" in Preview.
In the Transition Section , press CUT to instantly cut the setup to Program.
Set up the desired "look" in Preview.
Preset the desired transition rate:
a. Press { HOME } > { EFFECTS } to display the Effects Menu .
b. Adjust the Transition Rate field for the desired rate, in 0.1 second
increments.
In the Transition Section , press MIX to dissolve the setup to Program.
Set up the desired "look" in Preview.
Preset the desired transition rate, wipe effect and wipe edge:
a. Press { HOME } > { EFFECTS } to display the Effects Menu .
Adjust the Transition Rate field for the desired rate, in 0.1 second
b.
increments.
c. Adjust the Transition Wipe field for the desired wipe pattern.
d. Adjust the Transition Edge field for the desired wipe edge.
In the Transition Section , press WIPE to wipe the setup to Program.

Working with Transitions

135