Barco ScreenPRO-II User Manual page 35

2. Hardware Orientation
qê~åëáíáçå=pÉÅíáçå
The figure below illustrates the Transition Section .
Figure 2-6. Transition Section
Descriptions of each button are provided below:
WIPE — press to transition from Preview to Program at a pre-defined rate — using one of
several wipe patterns. The wipe patterns, edge types and transition rates are selected
WIPE
using the Effects Menu .
•
•
CUT — press to instantly cut the images from Preview to Program.
CUT
MIX — press to dissolve from Preview to Program at a pre-defined rate. Auto transition
rates are defined using the Effects Menu .
MIX
•
•
ScreenPRO-II • User's Guide
WIPE CUT MIX
Transitions
In Chapter 4, refer to the "
In Chapter 6, refer to the "
operational procedures.
In Chapter 4, refer to the "
In Chapter 6, refer to the "
operational procedures.
" section on page 63 for menu details.
Effects Menu
Working with Transitions
Effects Menu " section on page 63 for menu details.
Working with Transitions
Front Panel Sections
" section on page 135 for
" section on page 135 for
23