Table of Contents
Advertisement
4. Menu Orientation
System Menu
fåéìí=`~éíìêÉ=~åÇ=mêçÅÉëë=m~åÉä
On the Input Setup Menu for universal inputs, press {Capture and Process} to display
Capture
the Input Capture and Process Panel .
And
The panel is divided into two sections:
Process
•
•
fåéìí=`~éíìêÉ=~åÇ=qáãáåÖ=pÉÅíáçå
The figure below illustrates the Input Capture and Timing Section :
Capture and Timing
Figure 4-53. Input Capture and Timing Section, Universal Inputs
The following adjustments are provided:
•
Auto
Acquire
Off
124
Input Capture and Timing Section
Input Processing Section
Auto
Input
EDID
Acquire
Format
Format
Off
Adjust
Adjust
H
V
Timing
Timing
Press {Auto Acquire} to toggle the Auto Acquire mode On or Off . This function
is per connector on the UIC , and not per input.
~
When Off , you can manually set the resolution of the incoming source
using the {Input Format} button.
~
When On , the system attempts to detect the input resolution. As the
system auto-acquires, it compares the incoming signal to the formats
stored in the Input Format Table . When an exact match is found, the
format is applied and the Format field in the table is updated.
Note
If an exact match cannot be found, you may need to use
{Input Format} button to set the format manually.
Please note the following important points regarding Auto Acquire :
~
Once the system acquires a new input format, it automatically scales the
input up (or down) to the current native resolution.
~
The input's aspect ratio is fully maintained in this process, and no
masking will be applied. For example:
If a 1024 x 768 input is scaled up to 1920 x 1080 (HD/1080i), the
system fills vertically, leaving black pillars on either side.
If a 1920 x 1080 input is scaled down to 1280 x 720 (HD/720p), the
system fills horizontally, leaving black bars on the top and bottom.
~
After the input has been acquired, you can manually change the method
by which the system fills the screen, and you can also mask any edge
and re-scale the input. Refer to the "
section on page 129 for details.
Color
1:1
Sample
Space
Sample
Phase
SMPTE
On
Input Sizing and Scaling Panel
FSN-1004 • User's Guide • Rev 00
"
Advertisement
Table of Contents
