Updating Firmware; Downloading Dtp2 T 212 Firmware - Extron electronics DTP2 T 212 User Manual

Updating Firmware

Firmware for the DTP2 T 212 can be updated using PCS. Updates to the DTP2 T 212
firmware are made available periodically via the
version of firmware is currently loaded on your switcher by entering the SIS Q command via
the RS-232 or USB interface (see
see the firmware version in PCS (see
Downloading DTP2 T 212 Firmware
To download the latest version of firmware for the DTP2 T 212, follow these instructions:
1.
2.
3.
4.
5.
6.
7.
8.
Power on a PC that is connected to the same network as the switcher.
Go to www.extron.com, and mouse over the Download tab (see figure 29,
Figure 29. Firmware Link on the Download Tab
Click the Firmware link (
2
Figure 30. Firmware Page with Alphabetic Navigation Bar
Click the letter D from the alphabetic navigation bar (see figure 30,
Scroll down the page to find the firmware for the DTP2 T 212.
(Optional) Click Release Notes for more information about the firmware update.
Click Download. The product download screen opens.
Enter the required user information and click Download. An executable (.exe) file is
downloaded to the PC. Run this program to place the firmware on the PC for future
use. Make a note of the folder where the firmware file was saved.
Extron website. You can find out what
Query firmware version
Hardware Settings on page 29).
) on the drop-down menu. The firmware page opens.
DTP2 T 212 • Configuration Software
on page 45). You can also
).
1
).
1
33