Table of Contents
Advertisement
HDCP Status — Indicates the HDCP status of the input source. The HDMI input
2
negotiates and authenticates HDCP with the source device, if the source requires HDCP
encryption (see
figure 15
HDCP Authorized — Select this checkbox to turn the HDCP Authorized on (default)
3
or off. When disabled (OFF), the DTP2 T 212 switcher does not display content that
requires HDCP, and displays a green screen.
Audio Format — Select the audio format for the inputs from the drop down menu:
4
•
Auto — Embedded digital audio is passed. If digital audio is not detected, the
analog audio is embedded.
•
Digital — Embedded digital audio is passed.
•
Analog — Analog audio is always embedded.
Output Configuration
There are two panes in the Output Configuration panel: HDMI A and DTP/HDBT B (see
figure 16). These panes allow the user to view the status and configure the output signal for
both the HDMI and DTP/HDBT outputs.
Figure 16.
Output Configuration Panel
Signal Presence — Indicator shows green when an active HDMI signal is present.
1
HDCP Status — Indicates whether the display connected to the output is HDCP
2
compliant.
Color Bit Depth — Set the color bit depth to either Auto (default) or Force 8‑bit.
3
Format — Set the HDMI output format to:
4
•
Auto — (based on sink EDID), default
•
DVI RGB 444
•
HDMI RGB 444 Full
•
HDMI RGB 444 Limited
•
HDMI YUV 444 Limited
•
HDMI YUV 422 Limited
HDCP Mode — Set the HDCP Mode to:
5
•
Follow Input — Encrypts the output only when required by the selected input
source (default).
•
Always Encrypt Output — Always encrypts the output, regardless of the HDCP
status of the input source.
on page 24).
DTP2 T 212 • Configuration Software
25
Advertisement
Table of Contents
