Table of Contents
Advertisement
Output: One female HDMI type‑A connector and one female RJ45 connector to
•
send the DTP/HDBaseT signals — Outputs are configurable for simultaneous
operation, or the HDMI output may be assigned to either HDMI input to support a local
monitor.
•
Supports computer and video resolutions up to 4K/60 — The HDMI output
supports 4K/60 at 4:4:4 chroma sampling. The DTP2 output supports 3840x2160 @
60 Hz and requires connection to a matching DTP2 product.
Auto‑switching between inputs — Auto-switching allows for simple, unmanaged
•
installation in locations such as in a lectern or under a conference table. When multiple
inputs are active, the switching priority is configurable.
Analog stereo audio embedding — Analog stereo audio signals can be selectively
•
embedded onto the digital video output signal. The DTP2 T 212 can be set to pass the
embedded digital audio, embed the analog audio, or to automatically embed the analog
audio when no digital audio is detected.
•
Supported HDMI 2.0b specification features include data rates up to 18 Gbps,
HDR, Deep Color up to 12 bit, 3D, and HD lossless audio formats.
•
Support for HDR – High Dynamic Range video — The DTP2 T 212 enables greater
contrast range and wider color gamut by providing the necessary video bandwidth, color
depth, and metadata interchange capability for HDR video.
HDCP 2.3 compliant — Ensures display of content-protected 4K video media and
•
maintains interoperability with earlier versions of HDCP.
•
Remote power capability — For simplified installation, the transmitter can be remotely
powered by a DTP2-enabled product over the twisted pair connection. It can also be
configured to provide power to the connected DTP2 receiver product.
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
•
optimal performance.
•
Compatible with CATx shielded twisted pair cable — Shielded twisted pair cabling
with solid center conductor sizes of 24 AWG or better is recommended for optimal
performance.
DTP2 output is compatible with HDBaseT‑enabled devices — The TP output can
•
be configured to send video and embedded audio, plus bidirectional RS 232 and IR
signals to an HDBaseT-enabled display.
•
Accepts additional analog stereo audio signals — The DTP2 T 212 accepts stereo
analog audio signals for simultaneous transmission over the same shielded twisted pair
cable.
•
Audio input assignment — The analog audio input can be assigned to any video
input, or it can be set to follow the input switch.
•
Bidirectional RS‑232 and IR pass‑through for AV device control — Bidirectional
RS-232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
•
Supports multiple embedded audio formats — The DTP2 T 212 is compatible with
a broad range of multi-channel audio signals, providing reliable operation with HDMI
sources.
User‑selectable HDCP authorization — Allows the unit to appear HDCP compliant
•
or non HDCP compliant to the connected source, which is beneficial if the source
automatically encrypts all content when connected to an HDCP-compliant device.
Protected material is not passed in non HDCP mode.
DTP2 T 212 • Introduction
2
Advertisement
Table of Contents
