Table of Contents
Advertisement
ATTENTION:
•
Valid firmware files must have the file extension .S19. A file with any other
extension is not a firmware upgrade for this product and could cause the
switcher to stop functioning.
•
Les fichiers firmware valides doivent contenir l'extension fichier .S19. Un fichier
avec n'importe quelle autre extension n'est pas une mise à jour de firmware
pour cet appareil et l'appareil pourrait arrêter de fonctionner.
12.
Click Open or double click on the firmware file.
13.
Click Update on the Update Firmware dialog box. This uploads and verifies the new
firmware onto your connected device. The Installing Firmware progress field
shows the progress of the upload. After the upload is complete, a dialogue box opens
confirming that the upload is complete.
Click Close. The software returns to the Device Discovery window.
14.
15.
Select your device from the Device Discovery menu in PCS. A connection must be
re-established with the device before continuing to use the software.
16.
Click Connect, or double click on the device. The device reconnects to the software.
NOTE: The original factory-installed firmware is permanently available on the
DTP2 T 212. If the attempted firmware upload fails for any reason, the switching
transmitter reverts to the factory version.
DTP2 T 212 • Configuration Software
36
Advertisement
Table of Contents
