Table of Contents
Advertisement
The Product Configuration Software opens to the device main menu (see figure 14).
Figure 14.
The configuration pages have a global navigation bar from which each of the individual
configuration pages can be accessed.
These tabs are:
Input/Output Configuration
1
EDID Minder
2
The AV Controls panel (
by clicking the arrow button on the top right of the panel.
6.
Select any of these tabs to begin configuring the DTP2 T 212.
Input/Output Configuration
The Input/Output Configuration page allows the user to configure the active inputs
and outputs.
Input Configuration
The Input Configuration panel (see figure 15) allows the user to view the input status,
and configure HDCP Authorized and Audio Format.
Figure 15.
Signal Type — Connection status shows HDMI when an active HDMI signal is present.
1
DTP2 T 212 PCS Main Menu
) on the left side is available on every page and can be hidden
4
Input Configuration Panel
General Settings
3
DTP2 T 212 • Configuration Software
24
Advertisement
Table of Contents
