Extron electronics DTP2 T 212 User Manual page 51

Command
HDCP Status (unsolicited)
View input HDCP status
View output HDCP status
KEY: X%
= Input HDCP status
X^
= Output HDCP status
Output HDCP Mode
Set output HDCP mode single
output
Set output HDCP mode all
outputs
View output HDCP mode
KEY: X2)
= Outputs
X2)
= HDCP output mode 1 = Encrypt as required by input. Continuous trials for HDMI sinks, attempt for 10s on DVI sinks
Video Output Format
Set format
View setting
KEY: X1)
= TMDS output format 1 = Auto (default),
X2)
= Video output
HDCP Authorized Device
Set HDCP authorization per input
Set HDCP authorization all inputs
View HDCP authorization status
KEY: X!
= Inputs
X@
= On/Off
HDCP Notification
Disable green screen
Enable green screen
View HDCP notifications
KEY: X2^
= Green screen
ASCII Command
(Host to Switcher)
E I HDCP }
Verbose modes 2/3
E }
OHDCP
Verbose modes 2/3
0 = No video detected, 1 = Video detected with HDCP,
0 = No sink detected, 1 = Sink detected with HDCP,
E S X2) * X2# HDCP }
E S X2# HDCP }
E SHDCP }
Verbose modes 2/3
1 to 2 (1 is default)
(then fail) - default, 2 = Always encrypt. Continuous trials for HDMI sinks, attempt for 10s on DVI
sinks (then fail).
E X2) * X1) VTPO }
VTPO
E }
Verbose modes 2/3
2 = DVI RGB 444,
5 = HDMI YUV 444 "Limited",
1 to 2
E E X! * X@ HDCP }
E E X@ HDCP }
E EHDCP }
Verbose modes 2/3
1 to 2
0 = Off, disabled, or undetected,
E N0HDCP }
E N1HDCP }
E NHDCP }
Verbose modes 2/3
0 = Disabled, 1 = Enabled (default)
Response
(Switcher to Host)
X% • X%]
HdcpI X% • X%]
X^ X^]
•
HdcpO X^ X^]
•
2 = Sink detected without HDCP
HdcpS X2) * X2#]
HdcpS X2#]
X2# • X2#]
HdcpS X2# X2#]
•
Vtpo X2) * X1)]
X1) • X1)]
Vtpo X1) • X1)]
3 = HDMI RGB "Full",
6 = HDMI YUV 422 "Limited"
HdcpE X! * X@]
HdcpE X@]
X@ • X@]
HdcpE X@ • X@]
1 = On, enabled, or detected (default)
HdcpN0 ]
HdcpN1 ]
X2^]
HdcpN X2^]
Additional Description
Input 1 status • Input 2 status
2 = Video detected without HDCP
4 = HDMI RGB "Limited",
Set HDCP authorization to
all inputs.
DTP2 T 212 • SIS Commands
X@ for
43