Table of Contents
Advertisement
Command
DTP Remote Power Status
View output remote power status
KEY: X2%
= Remote power
EDID Minder
View EDID in hex format
Query EDID native resolution
KEY: X1!
= EDID memory location
X1@
= Current EDID information in hexadecimal format (128 or 256 bytes of hex data)
X1#
= Native resolution and refresh rate from selected EDID (example: 1920x1200 @ 60 Hz)
Channel Mute (deselect) Mode — via contact and tally pins
Set mode
View setting
KEY: X@
= On/Off
X1$
= Tally pin mode on channel mute
Verbose Mode
Set verbose mode
View verbose mode
NOTE: If tagged responses are enabled (modes 2 and 3) all read/view commands return the constant string and the
value, as the set command does.
KEY: X(
= Verbose mode
Device Name
Set unit name
Set name to factory default
View unit name
KEY: X&
= Device name The name can have up to 24 alphanumeric characters including hyphens (-), with no spaces. The first
character must be a letter, and the last character cannot be a hyphen. The default is DTP2-T-212.
ASCII Command
(Host to Switcher)
E
RPWR
}
Verbose modes 2/3
0 = No remote power/Off,
1 = DTP2 48 VDC/On
E
R
X!
EDID
}
E
N
X!
EDID
}
Example
1 to 2
E X@
*
X1$
MUTM
}
MUTM
E
}
0 = Off, disabled, or undetected (default),
0 = Always on (default),
E X(
CV
}
E
CV
}
Verbose modes 2/3
0 = Clear/none,
1 = Verbose mode (default),
3 = Verbose mode and tagged responses for queries
E X&
CN
}
E
•CN
}
E
CN
}
Response
(Switcher to Host)
X2%]
Rpwr
X2%]
X1@]
X1#]
1920x1200 @ 60 Hz
]
Mutm
X@
*
X1$]
*
X@
X1$]
1 = On, enabled, or detected
1 = Off when muted,
Vrb
X(]
X(]
Vrb
X(]
2 = Tagged responses for queries,
Ipn •
X&]
Ipn•DTP2-T-212
]
X&]
Additional Description
X@
= disable/enable selects
0 channel if reselect input via
contact closure.
2 = Blink when muted
DTP2 T 212 • SIS Commands
44
Advertisement
Table of Contents
