Table of Contents
Advertisement
X1*
= Audio input
1 = Auto
2 = Digital
3 = Analog
X2)
= Video output
1 = A
2 = B
X2!
= Video and sync mute
0 = Unmute video and sync (default)
1 = Mute video to black screen with sync on
2 = Mute video and sync
X2@
= Analog audio
1 = Follow input (default)
2 = Lock analog audio to input 1
3 = Lock analog audio to input 2
X2#
= HDCP output mode
1 = Encrypt as required by input. Continuous trials for HDMI sinks, attempt for 10s on
DVI sinks (then fail). (default)
2 = Always encrypt. Continuous trials for HDMI sinks, attempt for 10s on DVI sinks
(then fail).
X2$
= 5 V output mode
1 = Auto (5 V enabled when source with 5 V present, otherwise Off)
2 = 5 V always enabled (default)
X2%
= Remote power
0 = No remote power (Off)
1 = DTP2 48 VDC (On)
X2^
= Green Screen
0 = Disabled
1 = Enabled (default)
X2&
= Over TP Control
0 = Over TP pass through (default)
1 = Over TP serial device control
NOTES:
•
On the HDMI output, CEC Communications always passes through.
•
On the DTP2 output, CEC Communications only passes through when connected
to a DTP2 or DTP standalone receiver. CEC Communications does not pass
through when connected to an IN1804, IN1808, or other similar switching/
distribution/matrix devices.
X2*
= CEC mode
0 = Disable CEC operations for this IO port (default)
2 = Enable insertion (unidirectional)
4 = Enable insertion and publish received CEC messages (bidirectional)
(recommended mode)
X2(
= CEC status
0 = CEC mode 0 disabled
2 = CEC mode 2 enabled but no device detected (unidirectional)
3 = CEC mode 2 enabled and device detected (unidirectional)
4 = CEC mode 4 enabled but no device detected (bidirectional)
5 = CEC mode 4 enabled and device detected (bidirectional)
DTP2 T 212 • SIS Commands
40
Advertisement
Table of Contents
