Table of Contents
Advertisement
Select Yes, now and every time I connect a device (see figure 9,
•
page 17) if you want the computer to automatically connect to Windows Update
to search the web every time the transmitter is connected to this USB port.
•
Select No, not this time (
Windows Update to search the web at this time (for example, if the driver is already
on your computer).
3.
Click Next (
).
4
4.
On the next screen, select the Install the software automatically
(Recommended) radio button (see figure 10,
5.
Click Next (
, you do not need to insert a disc).
2
1
1
Figure 10.
Selecting the Radio Button to Install the USB Driver Automatically
Your computer locates the driver needed to communicate with the DTP2 T 212 via the
USB port and loads it to the computer hard drive.
When the Completed screen appears, click Finish to close the wizard.
6.
NOTE: This wizard appears only the first time you connect the DTP2 T 212 to each
USB port. You do not see the wizard again unless you connect the transmitter to a
different USB port on your computer.
7.
Configure the transmitter as desired using SIS commands (see
starting on page 37) or Product Configuration Software (see
Software
starting on page 22).
) if you do not want the computer to connect to
3
).
1
2
2
DTP2 T 212 • Operation
, on
2
SIS Commands
Configuration
18
Advertisement
Table of Contents
