Connecting The Footswitch - GE Voluson P8 BT16 Basic Service Manual

GE DRAFT
DIRECTION 5723243, R
3-5-6

Connecting the Footswitch

The footswitch should be directly connected to any accessible USB-port on the Voluson™ P8 /
Voluson™ P6 (e.g., on rear of the system).
NOTE: Connection of the Footswitch is always the same.
After physical connection, adjust the Footswitch (Left/Right) as described in
adjust function of the Footswitch (Left/Middle/Right)" on page
6 DRAFT (M
EVISION
Figure 3-10 Footswitch connection scheme
Chapter 3 - Setup Instructions
23, 2018)
AY
3-67.
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
Section 3-9-1-7 "How to
™ P6
ANUAL
3-21