GE Voluson P8 BT16 Basic Service Manual page 278

GE RAFT
DIRECTION 5723243, R
5-17-5-3-1 BIOS "Boot Priority Order" Setting
NOTE: Depending on the installed PC-Motherboard version, different BIOS versions are available. The
displayed screens may slightly differ from images shown in this manual.
1.) Insert the System DVD into the DVD Drive.
2.) Turn system off and then back on.
3.) During startup, press the DEL key immediately, to enter the BIOS Setup.
4.) Enter the BIOS password:
5.) Use the "Arrow" keys [<-] or [->] on the alphanumeric keyboard to select the [Boot] tab.
6.) Using the keys [PgUp] (Arrow up) and [PgDn](Arrow down) on the alphanumeric keyboard select
Set Boot Priority and then press Enter.
5-70
6 DRAFT (M
EVISION
General operation and selection in BIOS and LINUX menu is done with:
polaris
Section 5-17 - LINUX - Voluson Maintenance System
23, 2018)
AY
• the alphanumeric keyboard
• the "Arrow" keys [left] , [right] , PG UP [up] , PG
DN [down] and
• the "Enter" key on the keyboard
(case sensitive) and then press Enter.
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
™ P6
ANUAL