GE Voluson P8 BT16 Basic Service Manual page 324

GE RAFT
DIRECTION 5723243, R
7-7-3-3 DRFM Overall Test
This diagnostic test performs the self-diagnosis of each electric component and interface in the DRFM
board.
Table 7-2
Table 7-2
Sub-section
7-7-3-3-1
7-7-3-3-2
7-7-3-3-3
7-7-3-3-4
7-7-3-3-5
7-7-3-3-1 Voltage DRFM
It verifies Each Power Voltage Level on DRFM board, and displays the current voltage levels and the
test result as PASSED/FAILED.
7-7-3-3-2 Temperature DRFM
It verifies each GPU, CPU, DPS temperature measure on DRFM and displays the current temperature
status and the test result as PASSED/FAILED.
7-7-3-3-3 IIC DRFM Interface
It verifies I2C path named I2C_Local by using EEPROM on DRFM board and displays the test result as
PASSED/FAILED.
7-7-3-3-4 HW ID Config
It verifies HW ID configuration on DRFM board and displays the current HW ID and the test result as
PASSED/FAILED.
7-7-3-3-5 FPGA DRFM Interface
It verifies FPGA(DRFM) configuration on DRFM board by reading/writing test data and displays the test
result as PASSED/FAILED.
7-32
6 DRAFT (M
EVISION
below outlines Voluson™ P8 / Voluson™ P6 Diagnostics Tool described in the sub-sections.
Automatic diagnostic test under DRFM Test
Voltage DRFM
Temperature DRFM
IIC DRFM Interface
HW ID Config
FPGA DRFM Interface
Section 7-7 - Hardware Tests
23, 2018)
AY
Description
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
Page Number
7-38
7-38
7-38
7-38
7-38
™ P6
ANUAL