GE Voluson P8 BT16 Basic Service Manual page 407

GE DRAFT
DIRECTION 5723243, R
5.) Pull 10 encoder key caps and 8 TGC control key caps out. Refer to the figure below.
Figure 8-76 Pulling 10 encoder key caps and 8 TGC control key caps out
6.) Disconnect A/N key cable and unscrew 10 screws of A/N key. Refer to the figures below.
Figure 8-77 Disconnecting A/N key cable and unscrew 10 screws
6 DRAFT (M
EVISION
Chapter 8 - Replacement Procedures
23, 2018)
AY
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
™ P6
ANUAL
8-59