GE Voluson P8 BT16 Basic Service Manual page 323

GE DRAFT
DIRECTION 5723243, R
7-7-3-2 VPD
This diagnostic test performs the self-diagnosis of each vital product data for board or parts.
7-7-3-2-1 DRFM
It verifies VPD information embedded in EEPROM on DRFM board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-2 DBM
It verifies VPD information embedded in EEPROM on DBM board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-3 DPI
It verifies VPD information embedded in EEPROM on DPI board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-4 DPS
It verifies VPD information embedded in EEPROM on DPS board and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-5 DC4D
It verifies VPD information embedded in EEPROM on DC4D and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-6 MDM
It verifies VPD information embedded in EEPROM on MDM and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-7 OPIO
It verifies VPD information embedded in EEPROM on OPIO and displays the part of VPD
information and the test result as PASSED/FAILED.
7-7-3-2-8 BATTERY
It verifies VPD information embedded in EEPROM on BATTERY Pack and displays the part of VPD
information and the test result as PASSED/FAILED.
6 DRAFT (M
EVISION
Chapter 7 - Diagnostics/Troubleshooting
23, 2018)
AY
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
™ P6
ANUAL
7-31