GE Voluson P8 BT16 Basic Service Manual page 280

GE RAFT
DIRECTION 5723243, R
5-17-5-3-2 New Hard Disk Setup
NOTE: If not already done, change BIOS "Boot Priority Order" as described in
1.) Wait for automatic boot into the "Voluson Maintenance System".
2.) In the displayed menus select [Media] -> [NewDisk] and then press ENTER.
3.) The following warning message will be displayed.
4.) ONLY if you are absolutely sure, select YES and then confirm with ENTER.
If you select YES, all data on the entire hard disk will be lost and can not be recovered!
NOTICE
This includes all stored images and patient data!
5.) Creating a new disk will take some time......
5-72
6 DRAFT (M
EVISION
Figure 5-45 Media -> NewDisk
Figure 5-46 WARNING! WARNING! WARNING!
Section 5-17 - LINUX - Voluson Maintenance System
23, 2018)
AY
V ™ P8 / V
OLUSON OLUSON
B S
ASIC ERVICE
Section 5-17-5-3-1 on page
™ P6
M
ANUAL
5-70.