GE Voluson P8 BT16 Basic Service Manual page 228

GE RAFT
DIRECTION 5723243, R
5-2-5 Description of Hardware Options
Table 5-3
1
2
3
4
5-2-5-1 CW - Continuous Wave Doppler
CW Doppler mode provides real time spectral analysis of CW Doppler signals. This information
describes the Doppler shifted signal from the moving reflectors in the CW Doppler beam. CW Doppler
can be referenced through a small pencil probe or phased array scan head, but it can also be used in
conjunction with a 2D image which has an M-line superimposed on the 2D image indicating the position
of the Doppler sample volume. For through-the-beamformer CW, this beam is steerable by the operator,
and is done by adjusting the location of the M-line. The CW Doppler beam, or M-mode line, can be
steered allowing interrogation along an operator-selected line within the image.
NOTE: This feature is available only on Voluson P8
5-2-5-2 ECG Module
For details see:
5-2-5-3 Wireless Network Adapter (WLAN - Wireless Local Area Network)
For details see:
5-2-5-4 DPS2 Battery Assy
For details see:
5-20
6 DRAFT (M
EVISION
Hardware Options
HW-Options
CW-Doppler
ECG Module
WLAN Network Adapter
DPS with Battery Assy
Section 5-10-3 "ECG Module" on page 5-39
Section 5-10-4 "Wireless Network Adapter" on page 5-39
Section 5-10-5 "DPS2 Battery Assy" on page 5-39
Section 5-2 - General Information
23, 2018)
AY
Description
5-2-5-1 CW - Continuous Wave Doppler
5-2-5-2 ECG Module
5-2-5-3 Wireless Network Adapter (WLAN - Wireless Local Area Network)
5-2-5-4 DPS2 Battery Assy
TM
systems.
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
™ P6
ANUAL