GE Voluson P8 BT16 Basic Service Manual page 46

GE RAFT
DIRECTION 5723243, R
Table 1-5
LABEL/SYMBOL
1-6
6 DRAFT (M
EVISION
Product Icons Voluson™ P8 / Voluson™ P6
PURPOSE/MEANING
"Mains OFF" Indicates the power off position of the mains
power switch.
"OFF/Standby" Indicates the power off/standby position of the
power switch.
CAUTION
This Power Switch DOES NOT ISOLATE Mains Supply
"Mains ON" Indicates the power on position of the mains
power switch.
"Protective Earth" Indicates the protective earth (grounding)
terminal.
"Equipotentiality" Indicates the terminal to be used for
connecting equipotential conductors when interconnecting
(grounding) with other equipment.
Waste Electrical and Electronic Equipment (WEEE) Disposal.
This symbol indicates that waste electrical and electronic
equipment must not be disposed as unsorted municipal waste
and must be collected separately. Please contact an
authorized representative of the manufacturer for information
concerning the decommissioning of your equipment.
These symbols indicate that at least one of the six hazardous
substances of the China RoHS Labelling Standard is above
the RoHS limitation.
The number inside the circle is referred to as the
Environmental Friendly Use Period (EFUP). It indicates the
number of years that the product, under normal use, will
remain harmless to health of humans or the environment.
EFUP = 10 for Short Use Products
EFUP = 20 for Medium Use Products
This product consists of devices that may contain mercury,
which must be recycled or disposed of in accordance with
local, state, or country laws.
(Within this system, the backlight lamps in the monitor, contain
mercury.)
Loading prohibited
Every system has a unique marking for identification. The UDI marking appears on the product labels
which is located on the top of the CPU. Scan or enter the information from these labels into the patient
health record as required by the governing laws.
Section 1-2 - Important Conventions
23, 2018)
AY
V ™ P8 / V
OLUSON OLUSON
B S
ASIC ERVICE
LOCATION
Rear of system at mains switch
Adjacent to On-Off/Standby switch left
below the Control panel.
Rear of system at mains switch
Rear of system at mains switch
(on primary power supply)
Rear of system at mains switch
(on primary power supply)
Rear side of the unit
On the plug of each probe
Rear side of the unit
On the plug of each probe
Rear side of the unit
not visible:
- below the cover on read side of Monitor
at top cover of the system
™ P6
M
ANUAL