GE Voluson P8 BT16 Basic Service Manual page 119

GE DRAFT
DIRECTION 5723243, R
6.) Color Correction. check mark Printer Hardware Color Correction
7.) Gray Balance. X = 50, Y = 50
8.) Adjustment by Color. Color(region) = Magenta Red
9.) Save the adjusted printer settings with Apply and OK. Close window and exit System Setup.
10.)Assign the printer to the remote keys P1, P2 and/or P3 ; see
6 DRAFT (M
EVISION
Figure 3-53 Graphic page (lightness /Color Correction)
Figure 3-54 Graphic page (Gray Balance/ Adjustment by Color)
Chapter 3 - Setup Instructions
23, 2018)
AY
Section 3-7-8-1 on page 3-53
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
™ P6
ANUAL
3-51