GE Voluson P8 BT16 Basic Service Manual page 181

GE DRAFT
DIRECTION 5723243, R
4-5-3 Save Full System Configuration (Full Backup)
When the "Full Backup" is saved on a network drive (to map a network drive see:
"Wireless Network Configuration" on page
or maintenance).
The backups reside in sub folders of the main "fullbackup" -folder found at the root of the drive.
For Example: Backups on the mapped Network Drive are below path Z:\fullbackup.
The directory structure of the full backup data is as follows:
NOTICE
When the backup is saved to an external USB-device, the system has to be informed about the removal
of the hardware. For this purpose every last dialog of "Full Backup Save" and "Full Backup Delete" has
!! NOTICE:
a STOP USB DEVICES button (see:
For further details review:
6 DRAFT (M
EVISION
The sub folders have the names fbX where X is a number
(e.g., Z:\fullbackup\fb1).
The data resides within a directory structure within these sub folders.
It is possible to move the fbX sub folders, even leaving gaps in the
numeration sequence.
However, NO change MUST be made to the contents of the fbX folders
itself, otherwise the backup data cannot be restored!
Figure 4-16 directory structure of full backup data
If the destination „Other drive" is selected, the available drives
(e.g., external USB-memory stick) can be chosen from the drop down menu.
Figure 4-17 "Other drive" drop down menu
Figure 4-18 Please stop USB Devices before unplugging!
Section 3-5-9 on page
Chapter 4 - Functional Checks
23, 2018)
AY
(cont?)
3-76), it may be desirable to move the data (e.g., for backup
Figure 4-18).
3-23.
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
Section 3-13-2
™ P6
ANUAL
4-17