Connecting The Footswitch - GE Voluson P6 Service Manual

GE H DRAFT
EALTHCARE
DIRECTION 5459672-100, R
3-5-6

Connecting the Footswitch

The footswitch should be directly connected to any accessible USB-port on the Voluson® P8 /
Voluson® P6 (e.g., on rear of the system).
NOTE: Connection of the Footswitch is always the same.
After physical connection, adjust the Footswitch (Left/Right) as described in
adjust function of the Footswitch (Left/Middle/Right)" on page
6 DRAFT (J
EVISION
Figure 3-10 Footswitch connection scheme
Chapter 3 - Setup Instructions
17, 2013)
ANUARY
3-58.
V ® P8 / V
OLUSON OLUSON
P S M
ROPRIETARY ERVICE
Section 3-8-1-6 "How to
® P6
ANUAL
3-19