GE Voluson P8 BT16 Basic Service Manual page 372

GE RAFT
DIRECTION 5723243, R
8-7-1 Operation for activating Options
1.) Press the F2 key on the control panel.
2.) In the "Utilities" menu select SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select ADMINISTRATION and then click the
Figure 8-2 on page
8-7-1-1 Operation for installing a "Demo Key" or a "Permanent Key":
1.) Position the cursor inside the input field desired and press the right/left trackball key.
2.) If one exists, clear/edit the current key code.
3.) Enter the encrypted serial code with the keyboard and click on SUBMIT. (Code will be checked.)
4.) Click the SAVE&EXIT button.
NOTE: After activating a key code, restart (turn off and on) the Voluson™ P8 / Voluson™ P6 system.
8-24
6 DRAFT (M
EVISION
8-7.)
Section 8-7 - Replacement or Activation of Options
23, 2018)
AY
V ™ P8 / V
OLUSON OLUSON
B S M
ASIC ERVICE
OPTIONS tab (see:
™ P6
ANUAL