Shift Unit, Servicing - Volkswagen Golf 2015 Repair Manual

❑ Installing. Refer to
7 - Shift Fork Group with Gearshift Rails
8 - 1st/2nd Gear Shift Segment
❑ Identification. Refer to
❑ The shift segment must still rotate easily after the lock washer is installed.
9 - 3rd/4th Gear Shift Segment
❑ Identification. Refer to
❑ The shift segment must still rotate easily after the lock washer is installed.
10 - Glide
11 - Spring
12 - Reverse Gear Shift Fork
13 - Support for the Reverse Gear Shift Fork
14 - Circlip
5.8

Shift Unit, Servicing

Special tools and workshop equipment required
♦ Breather Tube Tool - T10203-
♦ Torque Wrench 1331 5-50Nm - VAG1331-
– Remove the shift unit. Refer to
⇒ 5.4 Overview - Transmission Housing and Selector Mech‐
anism , page 95 .
Removing the Locking Elbow -A- from the Shift Cover
– Remove the outer part of the locking elbow.
– Pry out the locking elbow with a screwdriver.
Pressing the Locking Elbow -A- into Selector Cover
Installed position:
The marking -arrow- faces toward upper part of gearshift shaft.
– Install the shift unit. Refer to
⇒ 5.4 Overview - Transmission Housing and Selector Mech‐
anism , page 95 .
⇒ Fig. Installing the Angular Contact Ball Bearing into the Shift Fork , page 101
⇒ Fig. Shift Segment Identification , page 100
⇒ Fig. Shift Segment Identification , page 100
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
.
.
5. Transmission, Disassembling and Assembling
.
99