Volkswagen Golf 2015 Repair Manual page 115

– Remove pivot pins -A- on top side of transmission and bolts
-B- for transmission housing to clutch housing in area of dif‐
ferential.
– Remove the bolts -A- that connect the clutch and transmission
housing.
Note
Do not remove the nuts -B- for the bearing mount on the output
shaft.
– Remove both flange shafts.
– Remove the flange shafts with the springs, thrust washers and
tapered rings.
Remove the Following Components Together with the Transmis‐
sion Housing:
♦ 5th Gear Synchronizer Hub
♦ 5th Gear Wheel
• Both Spacer Plate - T10408/3- must be attached to the 5th
gear wheel.
• The Spacer Plate must be located above the 2 ribs on the
housing, opposite each other -arrows-.
Note
There is a needle bearing under the 5th gear wheel.
♦
Secure the Straps so that the needle bearing does not touch
♦
the 5th gear wheel when removing the transmission housing.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
5. Transmission, Disassembling and Assembling
109