Volkswagen Golf 2015 Repair Manual page 81

– Remove the left assembly mounting hex bolts -arrows- from
the transmission mounting.
– Turn the spindles on the Engine Support Bridge - 10-222A-
and lower the transmission to dimension -a-.
• Dimension -a- = approximately 50 mm
– Remove the transmission bracket -A- -arrows-.
Align the Transmission Support - 3282- with the Transmission
Support - Mounting Plate 39 - 3282/39- in order to remove the
0A4 transmission.
– Insert the Transmission Support - 3282- into the Engine and
Gearbox Jack - VAS6931- .
– Align the arms of the Transmission Support so that they match
up with the holes in the Adjustment Plate .
– Install the Mounting Elements -A and C-, on the Adjusting
Plate , as illustrated.
– Position the Engine-Transmission Jack under the vehicle. The
arrow symbol -B- on the Adjusting Plate points in the direction
of travel.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
2. Transmission, Removing and Installing
75