Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
❑ Quantity: 4
12 - Flange Shaft with Pressure Spring
❑ Removing and installing. Refer to
❑ Assembling. Refer to
13 - Bolt
❑ 25 Nm
5.7
Overview - Shift Forks
Note
The shift fork group does not need to be disassembled to re‐
♦
move and install shift segments, lock washers and angular
contact ball bearings.
Shift Forks, Servicing. Refer to
♦
⇒ 5.9 Shift Forks, Servicing , page 100
1 - 5th Gear Shift Segment
❑ Identification. Refer to
⇒ Fig. Shift Segment
Identification ,
page 100
.
❑ The shift segment must
still rotate easily after
the lock washer is instal‐
led.
2 - Lock Washer
❑ Replace after removing
❑ Removing. Refer to
⇒ Fig. Removing the
Lock Washer ,
page 100
.
❑ Installing. Refer to
⇒ Fig. Installing the
Lock Washer ,
page 100
.
3 - 5th Gear Shift Fork
❑ Adjusting. Refer to
⇒ Fig. Adjusting 5th
Gear , page 118
4 - Bolt
❑ 25 Nm
5 - 5th Gear Shift Jaw
6 - Angular Contact Ball Bear‐
ing
❑ Quantity: 4
❑ Removing. Refer to
⇒ Fig. Removing the
Angular Contact Ball
Bearing , page 101
❑ Installing the bearing in‐
ner race into the outer race. Refer to
⇒ Fig. Installing the Angular Contact Ball Bearing Inner Race -A- into the Outer Race , page 101
98
Rep. Gr.34 - Controls, Housing
⇒ 1.3 Right Seal, Replacing , page 185
⇒ 2 Differential , page 189
.
.
.
.
.