Volkswagen Golf 2015 Repair Manual page 75

– Remove the transmission support -A arrows-.
– Remove the clutch slave cylinder -B arrows- lay aside and se‐
cure with wire. Do not open the line system.
Caution
The clutch slave cylinder could be damaged.
♦ If the clutch slave cylinder is removed from the transmis‐
sion with pipe/hose line still connected, do not press the
clutch pedal.
– Remove the ground cable upward from the engine/transmis‐
sion connecting bolt or from the upper starter bolt.
– Disconnect the connector -arrow 1- from the Back-Up Lamp
Switch - F4- .
– Remove the connector -arrow 2- and wire -arrow 3- from the
starter.
– Remove the upper bolt from the starter.
– Remove the upper engine/transmission bolts.
– Unlock the retaining tab in direction of -arrow- and remove the
left engine cover mount -1-.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
2. Transmission, Removing and Installing
69