Clutch, Removing And Installing - Volkswagen Golf 2015 Repair Manual

2.2

Clutch, Removing and Installing

⇒ 2.2.1 Clutch, Removing and Installing, with Dual Mass Fly‐
wheel, Sachs , page 39
⇒ 2.2.2 Clutch, Removing and Installing, with Dual Mass Fly‐
wheel, LuK , page 42
⇒ 2.2.3 Clutch, Removing and Installing, with Single Flywheel ,
page 45
2.2.1 Clutch, Removing and Installing, with
Dual Mass Flywheel, Sachs
Special tools and workshop equipment required
♦ Flywheel Retainer - 3067-
♦ Alignment Tool - Clutch Plate - 3190A-
♦ Torque Wrench 1331 5-50Nm - VAG1331-
♦ Grease for Clutch Disc Shaft Splines - G 000 100-
Removing
• The transmission is removed.
– Insert the Flywheel Retainer - 3067- to loosen the bolts.
When Removing, Loosen the Bolts as Follows so that the Clutch
Pressure Plate Does Not Distort (Causing Shuddering on Accel‐
eration):
– Loosen the bolt diagonally in small steps.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
39
2. Clutch