Volkswagen Golf 2015 Repair Manual page 118

Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
– Install the reverse gear shift fork -1- with the support for the
reverse gear shift fork -2-, the spring -3- and the sliding piece
-4-.
Reverse gear location
– Install the gearshift mechanism/reverse gear -A-.
– Install the shift forks -B- together with the gearshift rails.
Reverse gear supports -C- are located in front of selector rails.
– Install the M8 x 100 stud bolts -A- into reverse shaft support
so that this shaft is aligned after mounting the transmission
housing.
– Align the gearshift rails.
Note
The shift segments must be installed in the grooves on the locking
collars.
– Apply Sealing Paste - AMV 188 200 03- evenly onto the seal‐
ing surface of the clutch housing.
– Install the transmission housing and tighten it secure.
Install the bolts for the reverse shaft support -arrow- as follows:
– Install the bolt -a-.
– Remove stud bolts -A- (⇒ upper illustration).
112
Rep. Gr.34 - Controls, Housing