– Install the bolt -c-.
Tightening sequence:
– Tighten the bolt -a- (⇒ upper illustration).
– Tighten the bolt -b-.
– Tighten the bolt -c- (⇒ upper illustration).
– Install the pivot pin -arrow- for the shift forks. To do this align
shift mechanism using a screwdriver, so that the relevant pivot
pin can be installed.
– Apply Sealing Paste - AMV 188 200 03- evenly onto the cap
sealing surface.
– Install the gearshift shaft cover.
Install the gearshift shaft cover as follows:
– Move the gearshift rail into the neutral position.
– Apply Sealing Paste - AMV 188 200 03- evenly onto the seal‐
ing surface of the gearshift cover.
– Move the gearshift shaft into neutral.
– Position the selector shaft so that selector finger -arrow- is in‐
serted into the selector rails.
– Tighten the gearshift shaft gearshift cover.
Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
5. Transmission, Disassembling and Assembling
113