Volkswagen Golf 2015 Repair Manual page 22

Golf 2015 ➤ , Golf Variant 2015 ➤
Manual Transmission - Edition 12.2014
❑ Seals/O-rings suitable for the line connection material. Refer to
⇒ Fig. Sealing Rings/O-Rings for Hose/Line Assembly or Pipe , page 16
❑ Allocation. Refer to the Parts Catalog.
13 - Clamp
❑ The clamp must be removed in order to remove/install the hose/line assembly
14 - Clutch Slave Cylinder
❑ Removing and installing. Refer to
Disconnect and Connect Clutch Mechanism Wires
Separating
– Open the clip -3- with a screwdriver and remove the hose/line
assembly -1- from the connection -4-.
Connecting
Note
♦ An O-ring can also be installed instead of a seal -2-. Refer to
⇒ Fig. Sealing Rings/O-Rings for Hose/Line Assembly or
Pipe , page 16 .
Replace the damaged seal -2-.
♦
– Press in the hose/line assembly -1- at the connection -4- until
the clip -3- engages audibly.
– Pull on the hose/line assembly to make sure it is secure.
Sealing Rings/O-Rings for Hose/Line Assembly or Pipe
Item Line Connection Version
1 Line connection with a groove all the way around
-arrow 1-
2 Line connection with a shoulder -arrow 2-
3 Line connection with a shoulder -arrow 2- and with
a groove all the way around -arrow 3-
• The seal / O-ring must be installed in the groove -arrow 1- and
-arrow 3-.
16
Rep. Gr.30 - Clutch
⇒ 1.11 Clutch Slave Cylinder, Removing and Installing , page 30 .