GE LOGIQ 100 PRO Technical Publication page 192

GE H
EALTHCARE
D 5305880-100, R
IRECTION
10.6.6.5 Data sheet for Probe Source Leakage Current
The test passes when all readings measure less than the values shown in Table 10-14 and
Table 10-15. Record all data on the Planned Maintenance Inspection Certificate.
Equipment damage possibility. Never switch the Polarity and the status of Neutral when the unit
is powered ON. Be sure to turn the unit power OFF before switching them using the POLARITY
switch and/or the NEUTRAL switch. Otherwise, the unit may be damaged
Unit Power
Table 10-18 Typical Data Sheet For Probe Source Leakage Current
Page 10-22
Ap p r o v e d Do c u m e n t - 5 3 0 5 8 8 0 - 1 0 0 T PH_ r 3 . p d f Pa g e 1 9 3 o f 1 9 7
3
EVISION
.
Tester Power Polarity
Switch
ON NORM
ON NORM
ON REV
ON REV
OFF NORM
OFF NORM
OFF REV
OFF REV
Section 10-6 - Electrical Safety Tests
LOGIQ™ 100 PRO S
Probe Tested:
Tester GROUND or
NEUTRAL Switch
OPEN
CLOSED
OPEN
CLOSED
OPEN
CLOSED
OPEN
CLOSED
M
ERVICE ANUAL
Measurement